Especifica las medidas en centímetros.
El debe estar entre: (cm) y (cm)
Estimated shipping on 06.09.22
You have the possibility to choose to buy only the fabric to renew your Japanese panels, or buy them completely including the rail, you choose.
The translucent fabric provides more privacy than the screen, as it allows light to pass through without visibility both during the day and at night. It can be a good option if our windows are very large or if we are very exposed to the street.
Our technical fabrics have several light inputs, there are also screen and opaque fabrics.
Our products are made with synthetic fabrics that repel dust, especially screen and opaque fabrics. Here are some maintenance tips:
1. We don't need to put them in the washing machine to clean them.
2. If you have a stain, a towel or a simple damp cloth and soap will be enough to clean it.
3. To remove the dust, we can use a vacuum cleaner or pressurized air, without rubbing.
4. We must not use solvents or abrasive substances that could damage the coating of the fabric, such as ammonia or bleach.
5. Careful with photographic blinds, as they are more delicate.
The track is attached to an invisible anchor bracket that is either directly attached to the ceiling or to a fixing bracket to allow installation on the wall.
The Japanese panel gutter has different depths, depending on the number of lanes it has.
These are its measurements:
2. 2 ways: 3.8 cm
3. 3 ways: 5.6 cm
4. 4 ways: 7.4 cm
< b> 5. 5 ways: 9.2 cm
Our lower counterweights allow for a perfect straight fall. They measure 4 cm in height.
The translucent fabric is a lighter fabric and its main feature is that it provides more privacy than the screen, as it allows light to pass through without visibility both during the day and at night. It can be a good option if our windows are very large or if we are very exposed to the street.
We also have our technical fabrics, such as the screen, which have several light entrances, or opaque fabrics whose function is to block the passage of light.
With translucent fabric, you will see light and silhouettes, but there is no visibility from the outside to the inside.
Ceiling installation:
They must be 1 cm or 2 cm above the ground.
Wall installation:
possible to adjust the distance in the installation.
We do not recommend panels wider than 70 cm. Panels larger than this size are very large and heavy, and may look more like doors than panels.
We do not recommend panels that are less than 40 cm wide. It is as much for an aesthetic reason as for a functional reason.
In this video we will show you how to cut a gutter from your Japanese panels.
The wide color palette offered by the Translucent Corti fabric adapts to any style, as well as being a durable and high-quality material. Combine, create and customize your Japanese panels.
The panels move through a rail and cover your window in an easy way, once collected they are overlapped one after another in an orderly way. You will find a wide variety of different shades so you can adapt them to your decoration. Installation of the panel to the track is simple. By means of a velcro system it can be easily removed and changed. Because of this, they are easier to clean and replace with the same or different fabrics. At Cortinadecor we make your panel to measure so that it fits perfectly to all your needs.
The translucent fabric provides more privacy than the screen, as it allows light to pass through without visibility both during the day and at night. It can be a good option if our windows are very large or if we are very exposed to the street.
Our technical fabrics have several light inputs, there are also screen and opaque fabrics.
Our products are made with synthetic fabrics that repel dust, especially screen and opaque fabrics. Here are some maintenance tips:
1. We don't need to put them in the washing machine to clean them.
2. If you have a stain, a towel or a simple damp cloth and soap will be enough to clean it.
3. To remove the dust, we can use a vacuum cleaner or pressurized air, without rubbing.
4. We must not use solvents or abrasive substances that could damage the coating of the fabric, such as ammonia or bleach.
5. Careful with photographic blinds, as they are more delicate.
The track is attached to an invisible anchor bracket that is either directly attached to the ceiling or to a fixing bracket to allow installation on the wall.
The Japanese panel gutter has different depths, depending on the number of lanes it has.
These are its measurements:
2. 2 ways: 3.8 cm
3. 3 ways: 5.6 cm
4. 4 ways: 7.4 cm
< b> 5. 5 ways: 9.2 cm
Our lower counterweights allow for a perfect straight fall. They measure 4 cm in height.
The translucent fabric is a lighter fabric and its main feature is that it provides more privacy than the screen, as it allows light to pass through without visibility both during the day and at night. It can be a good option if our windows are very large or if we are very exposed to the street.
We also have our technical fabrics, such as the screen, which have several light entrances, or opaque fabrics whose function is to block the passage of light.
With translucent fabric, you will see light and silhouettes, but there is no visibility from the outside to the inside.
Ceiling installation:
They must be 1 cm or 2 cm above the ground.
Wall installation:
possible to adjust the distance in the installation.
We do not recommend panels wider than 70 cm. Panels larger than this size are very large and heavy, and may look more like doors than panels.
We do not recommend panels that are less than 40 cm wide. It is as much for an aesthetic reason as for a functional reason.
In this video we will show you how to cut a gutter from your Japanese panels.