Estimated shipping on 15.05.24
The screen fabric allows you to regulate the amount of light that passes through the fabric and allows you to preserve the view depending on the degree of aperture.
There are several degrees of aperture:
· 1% opening
Minimum transparency and low visibility to the outside.
· 3% opening
Transparency medium and low visibility to the outside.
· Opening 5%
Medium transparency and good visibility to the outside.
With screen fabric, the less light there is on the outside, the more visibility there is on the inside, depending on the degree of openness you choose.
This means that during the day you will not be seen from the outside, but during the evening and night there is a certain degree of visibility to the inside.
· Opening 1%: Low visibility to the interior.
· 3% opening: Low visibility to the interior.
· 5% opening: Good visibility for the interior.
· Opening 10%: Great visibility to the interior.
In this table you will find the measurements of the vertical laminate on both sides.
*All measurements are in centimeters.
In this table you will find the dimensions of the vertical slats on one side.
*All measurements are in centimeters.
Yes, but it will have to be done with a budget, with our commercial department and the number of blades will always be even.
As they are technical fabrics, vertical slat blinds are very easy to clean, as they can only be cleaned with a damp cloth and a few drops of neutral soap.
It is not recommended, under any circumstances, to immerse or wash the slats in water, as the fabric will lose its sizing and, therefore, its shape. Do not rub the stain hard either, as this can damage the fabric and even cause it to lose colour in the area.
This type of fabric, under normal conditions, repels dust, so a quarterly cleaning and a little more thorough wiping with a cloth in case they have any splash stains, will be more than enough.
In this video we will show you how to align the gears to correct the defect and make it work correctly.
1. Ceiling Installation
When the slats are installed on the ceiling, we recommend fixing the brackets at a distance of 12 cm from the wall, in order to have a minimum space of 5 cm between the slats and the wall.
2. Wall installation
When the blades are installed on the wall, the distance (D) between the blades and the wall depends on the blade width (L) and the size of the fixing square (E):
Both are great, but there are particularities of each that can influence the customer's choice:
With a rod, when you pull the curtain down, you must pull the rod, so that the force to move the blades is done by the person.
While witha cord, the blades mechanically move sideways, simply by pulling the cord.
The grey boxes indicate the centimeter length of the rail, while the white boxes indicate the approximate number of slats for that size.
The grey boxes indicate the centimetre length of the rail, while the white boxes indicate the approximate number of slats for that size.
The Screen Luxury fabric with a 5% opening has a two-tone thread weave that enhances and gives firmness to the fabric. Cataloged with the M1 fire retardant seal, with antibacterial treatment and like all our Screen fabrics, it is easy to maintain and clean, making it one of the favorite fabrics when installing it on vertical slats.
The overlapping of vertical slat shades provide visual balance, spaciousness and personality to the room. This product allows you to select different slat and collection widths according to your needs. Through three actions, open, closed and orientation, the slats can be adjusted according to the direction of the sun to obtain maximum visual and thermal comfort. The lower part of this product is provided with PVC chains and hidden counterweights that keep the slats straight, preventing the fabric from being damaged by friction or knocks. If you are looking for a guarantee, quality and a product adapted to your needs, at Cortinadecor we have it.
The screen fabric allows you to regulate the amount of light that passes through the fabric and allows you to preserve the view depending on the degree of aperture.
There are several degrees of aperture:
· 1% opening
Minimum transparency and low visibility to the outside.
· 3% opening
Transparency medium and low visibility to the outside.
· Opening 5%
Medium transparency and good visibility to the outside.
With screen fabric, the less light there is on the outside, the more visibility there is on the inside, depending on the degree of openness you choose.
This means that during the day you will not be seen from the outside, but during the evening and night there is a certain degree of visibility to the inside.
· Opening 1%: Low visibility to the interior.
· 3% opening: Low visibility to the interior.
· 5% opening: Good visibility for the interior.
· Opening 10%: Great visibility to the interior.
In this table you will find the measurements of the vertical laminate on both sides.
*All measurements are in centimeters.
In this table you will find the dimensions of the vertical slats on one side.
*All measurements are in centimeters.
Yes, but it will have to be done with a budget, with our commercial department and the number of blades will always be even.
As they are technical fabrics, vertical slat blinds are very easy to clean, as they can only be cleaned with a damp cloth and a few drops of neutral soap.
It is not recommended, under any circumstances, to immerse or wash the slats in water, as the fabric will lose its sizing and, therefore, its shape. Do not rub the stain hard either, as this can damage the fabric and even cause it to lose colour in the area.
This type of fabric, under normal conditions, repels dust, so a quarterly cleaning and a little more thorough wiping with a cloth in case they have any splash stains, will be more than enough.
In this video we will show you how to align the gears to correct the defect and make it work correctly.
1. Ceiling Installation
When the slats are installed on the ceiling, we recommend fixing the brackets at a distance of 12 cm from the wall, in order to have a minimum space of 5 cm between the slats and the wall.
2. Wall installation
When the blades are installed on the wall, the distance (D) between the blades and the wall depends on the blade width (L) and the size of the fixing square (E):
Both are great, but there are particularities of each that can influence the customer's choice:
With a rod, when you pull the curtain down, you must pull the rod, so that the force to move the blades is done by the person.
While witha cord, the blades mechanically move sideways, simply by pulling the cord.
The grey boxes indicate the centimeter length of the rail, while the white boxes indicate the approximate number of slats for that size.
The grey boxes indicate the centimetre length of the rail, while the white boxes indicate the approximate number of slats for that size.