Estimated shipping on 22.01.25
The screen fabric allows you to regulate the amount of light that passes through the fabric and allows you to preserve the view depending on the degree of aperture.
There are several degrees of aperture:
· 1% opening
Minimum transparency and low visibility to the outside.
· 3% opening
Transparency medium and low visibility to the outside.
· Opening 5%
Medium transparency and good visibility to the outside.
Maximum transparency and great visibility to the outside.
With screen fabric, the less light there is on the outside, the more visibility there is on the inside, depending on the degree of openness you choose.
This means that during the day you will not be seen from the outside, but during the evening and night there is a certain degree of visibility to the inside.
· Opening 1%: Low visibility to the interior.
· 3% opening: Low visibility to the interior.
· 5% opening: Good visibility for the interior.
· Opening 10%: Great visibility to the interior.
In this table you will find the measurements of the vertical laminate on both sides.
*All measurements are in centimeters.
In this table you will find the dimensions of the vertical slats on one side.
*All measurements are in centimeters.
Yes, but it will have to be done with a budget, with our commercial department and the number of blades will always be even.
As they are technical fabrics, vertical slat blinds are very easy to clean, as they can only be cleaned with a damp cloth and a few drops of neutral soap.
It is not recommended, under any circumstances, to immerse or wash the slats in water, as the fabric will lose its sizing and, therefore, its shape. Do not rub the stain hard either, as this can damage the fabric and even cause it to lose colour in the area.
This type of fabric, under normal conditions, repels dust, so a quarterly cleaning and a little more thorough wiping with a cloth in case they have any splash stains, will be more than enough.
In this video we will show you how to align the gears to correct the defect and make it work correctly.
The grey boxes indicate the centimeter length of the rail, while the white boxes indicate the approximate number of slats for that size.
1. Ceiling Installation
When the slats are installed on the ceiling, we recommend fixing the brackets at a distance of 12 cm from the wall, in order to have a minimum space of 5 cm between the slats and the wall.
2. Wall installation
When the blades are installed on the wall, the distance (D) between the blades and the wall depends on the blade width (L) and the size of the fixing square (E):
L = 8 cm, D = 3.5 cm
L = 12 cm, D = 7.5 cm
L = 15 cm, D = 10.5 cm
L = 8 cm, D = 1.6 cm
L = 12 cm, D = 5.6 cm
L = 15 cm, D = 8.6 cm
The grey boxes indicate the centimetre length of the rail, while the white boxes indicate the approximate number of slats for that size.
Both are great, but there are particularities of each that can influence the customer's choice:
With a rod, when you pull the curtain down, you must pull the rod, so that the force to move the blades is done by the person.
While witha cord, the blades mechanically move sideways, simply by pulling the cord.
With an opening of 1%, the Screen Corti 4000 fabric will provide you with precise light control with high opacity. Available to select a single color or make different combinations, always tailored.
Controls the total entry of light thanks to the 180° rotation of the slats. With a perfect overlapping of the slats and equidistant separation between them. It provides the room with a visual balance, spaciousness and personality. You can customize them to measure with all the attributes that we offer you. Cortinadecor will make your home unique.
The screen fabric allows you to regulate the amount of light that passes through the fabric and allows you to preserve the view depending on the degree of aperture.
There are several degrees of aperture:
· 1% opening
Minimum transparency and low visibility to the outside.
· 3% opening
Transparency medium and low visibility to the outside.
· Opening 5%
Medium transparency and good visibility to the outside.
Maximum transparency and great visibility to the outside.
With screen fabric, the less light there is on the outside, the more visibility there is on the inside, depending on the degree of openness you choose.
This means that during the day you will not be seen from the outside, but during the evening and night there is a certain degree of visibility to the inside.
· Opening 1%: Low visibility to the interior.
· 3% opening: Low visibility to the interior.
· 5% opening: Good visibility for the interior.
· Opening 10%: Great visibility to the interior.
In this table you will find the measurements of the vertical laminate on both sides.
*All measurements are in centimeters.
In this table you will find the dimensions of the vertical slats on one side.
*All measurements are in centimeters.
Yes, but it will have to be done with a budget, with our commercial department and the number of blades will always be even.
As they are technical fabrics, vertical slat blinds are very easy to clean, as they can only be cleaned with a damp cloth and a few drops of neutral soap.
It is not recommended, under any circumstances, to immerse or wash the slats in water, as the fabric will lose its sizing and, therefore, its shape. Do not rub the stain hard either, as this can damage the fabric and even cause it to lose colour in the area.
This type of fabric, under normal conditions, repels dust, so a quarterly cleaning and a little more thorough wiping with a cloth in case they have any splash stains, will be more than enough.
In this video we will show you how to align the gears to correct the defect and make it work correctly.
The grey boxes indicate the centimeter length of the rail, while the white boxes indicate the approximate number of slats for that size.
1. Ceiling Installation
When the slats are installed on the ceiling, we recommend fixing the brackets at a distance of 12 cm from the wall, in order to have a minimum space of 5 cm between the slats and the wall.
2. Wall installation
When the blades are installed on the wall, the distance (D) between the blades and the wall depends on the blade width (L) and the size of the fixing square (E):
L = 8 cm, D = 3.5 cm
L = 12 cm, D = 7.5 cm
L = 15 cm, D = 10.5 cm
L = 8 cm, D = 1.6 cm
L = 12 cm, D = 5.6 cm
L = 15 cm, D = 8.6 cm
The grey boxes indicate the centimetre length of the rail, while the white boxes indicate the approximate number of slats for that size.
Both are great, but there are particularities of each that can influence the customer's choice:
With a rod, when you pull the curtain down, you must pull the rod, so that the force to move the blades is done by the person.
While witha cord, the blades mechanically move sideways, simply by pulling the cord.
from 2 working days
Always at your disposal to help and advise you
To create curtains and blinds that adapt to all your windows
from 2 working days
Always at your disposal to help and advise you
To create curtains and blinds that adapt to all your windows