Estimated shipping on 04.11.24
No, we take care of calculating the fabric needed to make the curtain. You will need to measure the gap to be covered, the rod or the gutter from end to end and enter that measurement on the website.
The types of confection that occupy the least space will be: male, gathered, three pleats and straps.
The garments that can be installed on a gutter are the ruffles, males, three pleats and perfect wave.
The fittings that you can install on a curtain rod without rings are eyelets and loops. For the curtain panel, pleated and tri-fold curtain constructions, you will need the curtain rod rings and hooks to attach the curtain rod. The perfect wave curtain is the only curtain that cannot be fitted on a rod.
Product made to measure and in the chosen color.
Includes fabric ready to be hung.
If you still don't have a rail or curtain rod installed, you can enter here:
·Roll bars
Gutters
For the cleaning and maintenance of the curtains, we recommend removing the hooks before putting them in the washing machine.
This way you will prevent them from getting lost or rusting.
Don't worry about not knowing how to put them back, because over time and as the curtain falls, an indentation is made in the tape that indicates where to place each hook.
Curtains with this type of sewing will always be sent without gather, it is very easy to gather.
First we will have to tie two knots on one end so that the threads do not come out and then pull the other end.
This way , the fabric will gather itself.
The types of confection that take up the most space are perfect waves and eyelets.
When making the curtain, we will use approximately 150% more fabric than the indicated measurement to ensure the curtain's confection and effect are aesthetically pleasing. Thus, for every meter of finished curtain, we will use 1.5 meters of fabric.
We take care of this calculation in the factory, so you only need to indicate the width you want to cover as shown in our measurement guide.
No, we take care of calculating the fabric needed to make the curtain. You will need to measure the gap to be covered, the rod or the gutter from end to end and enter that measurement on the website.
The types of confection that occupy the least space will be: male, gathered, three pleats and straps.
The garments that can be installed on a gutter are the ruffles, males, three pleats and perfect wave.
The fittings that you can install on a curtain rod without rings are eyelets and loops. For the curtain panel, pleated and tri-fold curtain constructions, you will need the curtain rod rings and hooks to attach the curtain rod. The perfect wave curtain is the only curtain that cannot be fitted on a rod.
Product made to measure and in the chosen color.
Includes fabric ready to be hung.
If you still don't have a rail or curtain rod installed, you can enter here:
·Roll bars
Gutters
For the cleaning and maintenance of the curtains, we recommend removing the hooks before putting them in the washing machine.
This way you will prevent them from getting lost or rusting.
Don't worry about not knowing how to put them back, because over time and as the curtain falls, an indentation is made in the tape that indicates where to place each hook.
Curtains with this type of sewing will always be sent without gather, it is very easy to gather.
First we will have to tie two knots on one end so that the threads do not come out and then pull the other end.
This way , the fabric will gather itself.
The types of confection that take up the most space are perfect waves and eyelets.
When making the curtain, we will use approximately 150% more fabric than the indicated measurement to ensure the curtain's confection and effect are aesthetically pleasing. Thus, for every meter of finished curtain, we will use 1.5 meters of fabric.
We take care of this calculation in the factory, so you only need to indicate the width you want to cover as shown in our measurement guide.