Estimated shipping on 08.01.25
Before starting to measure, it is very important to take into account:
1. That the window is sliding.
2. The material must be aluminum.
3. That there are no protruding handles or knobs.
4. That the space between the window leaf and the frame is sufficient to allow the mosquito net to slide over the window. The quick way to do this is to put a 5 cent coin, if the coin fits in the hole, so does the mosquito net.
5. The outside profile of the “L” frame does not exceed 4 mm.
6. Finally, if our door or window is installed up to the floor or ceiling, all the top, bottom and side profiles must be at least 3 cm wide, so that the mosquito net can be fixed and slide correctly.
Width:
The width of the mosquito net must be equal to the width of one of the sashes of the sliding windows.
Height :
To measure the height, it is recommended to carry out measurements at various points of the window frame profile. At the top of the frame, the reference point is the bottom of the frame. At the bottom of the frame, the reference point is the top of the frame.
Warning!
If the height measurement is different between the left side and the right side, use the smaller measurement as the reference.
If the difference between one height and the other is greater than 4 mm, the sliding screen cannot be manufactured.
This screen is designed only to be placed on a sliding window, so to ensure it stays in place, the screen will have dimensions larger than the measurements requested in the order when including the frames.
No, if pets scratch or climb through the product, the mesh may tear or come off the guide.
No, there is only the graphite color option.
Yes, if the coin fits, the product can be installed, as long as it meets the following requirements:
1. The window must be sliding.
2. The material must be aluminum.
3. The outer frame profile is no more than 4 mm thick.
4. No protruding handles or knobs.
5. Finally, the top and bottom profiles must be at least 3 cm wide so that the mosquito net can be fixed and slid correctly.
No, because the mosquito net will cover the part of the window that is open, and the two window strips will be at the other end, preventing insects from entering.
No, this product is only suitable for aluminum sliding windows.
Sliding mosquito nets are perfect for sliding aluminum windows. With this custom-made product, we can open our windows with a simple lateral movement of the mosquito net towards the open area, having complete protection against insects.
These mosquito nets do not need installation, as they come assembled and ready to place on the window profile. The bearings of its brackets allow this mosquito net to slide smoothly on the interior profile of the window. With PVC-coated fiberglass mesh, they make it a highly resistant product that is easy to maintain. We have a wide range of aluminum colors to match your window. At Cortinadecor we offer you the best quality and guarantee at the best price, made in Spain.
No, if pets scratch or climb through the product, the mesh may tear or come off the guide.
No, there is only the graphite color option.
Yes, if the coin fits, the product can be installed, as long as it meets the following requirements:
1. The window must be sliding.
2. The material must be aluminum.
3. The outer frame profile is no more than 4 mm thick.
4. No protruding handles or knobs.
5. Finally, the top and bottom profiles must be at least 3 cm wide so that the mosquito net can be fixed and slid correctly.
No, because the mosquito net will cover the part of the window that is open, and the two window strips will be at the other end, preventing insects from entering.
No, this product is only suitable for aluminum sliding windows.
Before starting to measure, it is very important to take into account:
1. That the window is sliding.
2. The material must be aluminum.
3. That there are no protruding handles or knobs.
4. That the space between the window leaf and the frame is sufficient to allow the mosquito net to slide over the window. The quick way to do this is to put a 5 cent coin, if the coin fits in the hole, so does the mosquito net.
5. The outside profile of the “L” frame does not exceed 4 mm.
6. Finally, if our door or window is installed up to the floor or ceiling, all the top, bottom and side profiles must be at least 3 cm wide, so that the mosquito net can be fixed and slide correctly.
Width:
The width of the mosquito net must be equal to the width of one of the sashes of the sliding windows.
Height :
To measure the height, it is recommended to carry out measurements at various points of the window frame profile. At the top of the frame, the reference point is the bottom of the frame. At the bottom of the frame, the reference point is the top of the frame.
Warning!
If the height measurement is different between the left side and the right side, use the smaller measurement as the reference.
If the difference between one height and the other is greater than 4 mm, the sliding screen cannot be manufactured.
This screen is designed only to be placed on a sliding window, so to ensure it stays in place, the screen will have dimensions larger than the measurements requested in the order when including the frames.