Estimated shipping on 19.05.26
Before starting to measure, it is very important to take into account:
1. That the window is sliding.
2. The material must be aluminum.
3. That there are no protruding handles or knobs.
4. That the space between the window leaf and the frame is sufficient to allow the mosquito net to slide over the window. The quick way to do this is to put a 5 cent coin, if the coin fits in the hole, so does the mosquito net.
5. The outside profile of the “L” frame does not exceed 4 mm.
6. Finally, if our door or window is installed up to the floor or ceiling, all the top, bottom and side profiles must be at least 3 cm wide, so that the mosquito net can be fixed and slide correctly.
Width:
The width of the mosquito net must be equal to the width of one of the sashes of the sliding windows.
Height :
To measure the height, it is recommended to carry out measurements at various points of the window frame profile. At the top of the frame, the reference point is the bottom of the frame. At the bottom of the frame, the reference point is the top of the frame.
Warning!
If the height measurement is different between the left side and the right side, use the smaller measurement as the reference.
If the difference between one height and the other is greater than 4 mm, the sliding screen cannot be manufactured.
This screen is designed only to be placed on a sliding window, so to ensure it stays in place, the screen will have dimensions larger than the measurements requested in the order when including the frames.
Yes, if the coin fits, the product can be installed, as long as it meets the following requirements:
1. The window must be sliding.
2. The material must be aluminum.
3. The outer frame profile is no more than 4 mm thick.
4. No protruding handles or knobs.
5. Finally, the top and bottom profiles must be at least 3 cm wide so that the mosquito net can be fixed and slid correctly.
No, this product is only suitable for aluminum sliding windows.
No, because the mosquito net will cover the part of the window that is open, and the two window strips will be at the other end, preventing insects from entering.
Sliding insect screens for windows and doors designed for homes with pets. They feature a scratch-resistant mesh, providing a cat-proof solution against damage from claws and other pets. They also include a pet flap, perfect for allowing small pets to go in and out easily, while also acting as a balcony protection for cats without compromising ventilation.
Our sliding insect screens for windows and doors are the ideal solution to keep your home ventilated while protecting your pets. This model has been specially designed for households with animals, featuring a highly durable fabric: a scratch-resistant mesh for cats, perfect for preventing tears and escapes. Its sliding system allows for easy integration into windows and sliding doors, ensuring convenience in everyday use. In addition, they offer the option to include a pet flap for cats and small dogs, making it easy for your pets to move in and out without the need to open the screen. They are an excellent solution to manage your pets’ movement, preventing falls or escapes, and also work as a practical protective mesh for cats and other animals. Thanks to their strength, functionality, and discreet design, these insect screens adapt perfectly to any pet-friendly home, combining safety, durability, and comfort.
Yes, if the coin fits, the product can be installed, as long as it meets the following requirements:
1. The window must be sliding.
2. The material must be aluminum.
3. The outer frame profile is no more than 4 mm thick.
4. No protruding handles or knobs.
5. Finally, the top and bottom profiles must be at least 3 cm wide so that the mosquito net can be fixed and slid correctly.
No, this product is only suitable for aluminum sliding windows.
No, because the mosquito net will cover the part of the window that is open, and the two window strips will be at the other end, preventing insects from entering.
Before starting to measure, it is very important to take into account:
1. That the window is sliding.
2. The material must be aluminum.
3. That there are no protruding handles or knobs.
4. That the space between the window leaf and the frame is sufficient to allow the mosquito net to slide over the window. The quick way to do this is to put a 5 cent coin, if the coin fits in the hole, so does the mosquito net.
5. The outside profile of the “L” frame does not exceed 4 mm.
6. Finally, if our door or window is installed up to the floor or ceiling, all the top, bottom and side profiles must be at least 3 cm wide, so that the mosquito net can be fixed and slide correctly.
Width:
The width of the mosquito net must be equal to the width of one of the sashes of the sliding windows.
Height :
To measure the height, it is recommended to carry out measurements at various points of the window frame profile. At the top of the frame, the reference point is the bottom of the frame. At the bottom of the frame, the reference point is the top of the frame.
Warning!
If the height measurement is different between the left side and the right side, use the smaller measurement as the reference.
If the difference between one height and the other is greater than 4 mm, the sliding screen cannot be manufactured.
This screen is designed only to be placed on a sliding window, so to ensure it stays in place, the screen will have dimensions larger than the measurements requested in the order when including the frames.
from 2 working days
Always at your disposal to help and advise you
To create curtains and blinds that adapt to all your windows
from 2 working days
Always at your disposal to help and advise you
To create curtains and blinds that adapt to all your windows