Estimated shipping on 21.05.26
Before starting to measure, it is very important to take into account:
1. That the window is sliding.
2. The material must be aluminum.
3. That there are no protruding handles or knobs.
4. That the space between the window leaf and the frame is sufficient to allow the mosquito net to slide over the window. The quick way to do this is to put a 5 cent coin, if the coin fits in the hole, so does the mosquito net.
5. The outside profile of the “L” frame does not exceed 4 mm.
6. Finally, if our door or window is installed up to the floor or ceiling, all the top, bottom and side profiles must be at least 3 cm wide, so that the mosquito net can be fixed and slide correctly.
Width:
The width of the mosquito net must be equal to the width of one of the sashes of the sliding windows.
Height :
To measure the height, it is recommended to carry out measurements at various points of the window frame profile. At the top of the frame, the reference point is the bottom of the frame. At the bottom of the frame, the reference point is the top of the frame.
Warning!
If the height measurement is different between the left side and the right side, use the smaller measurement as the reference.
If the difference between one height and the other is greater than 4 mm, the sliding screen cannot be manufactured.
This screen is designed only to be placed on a sliding window, so to ensure it stays in place, the screen will have dimensions larger than the measurements requested in the order when including the frames.
Yes, if the coin fits, the product can be installed, as long as it meets the following requirements:
1. The window must be sliding.
2. The material must be aluminum.
3. The outer frame profile is no more than 4 mm thick.
4. No protruding handles or knobs.
5. Finally, the top and bottom profiles must be at least 3 cm wide so that the mosquito net can be fixed and slid correctly.

No, this product is only suitable for aluminum sliding windows.
No, because the mosquito net will cover the part of the window that is open, and the two window strips will be at the other end, preventing insects from entering.
No. It is only compatible with aluminum sliding windows (provided they meet the requirements in the measurement guide).
Yes. This mosquito screen features a specially reinforced mesh, specifically designed to withstand the typical scratches of pets such as cats and dogs. It is much more durable than a standard mosquito screen.
The mesh is designed to withstand daily use by pets, including light pushing or leaning. However, like any fabric, it is not indestructible against excessive force or strong impacts.
The main difference is the material: this mesh is thicker and more resistant, which prevents easy tearing from scratches. It maintains the functionality of a traditional mosquito screen, but with greater durability in homes with pets.
No. It is designed to maintain its shape and tension over time, even with regular use by pets.
Yes. It acts as a protective barrier, allowing the room to be ventilated without fully opening the window, preventing unwanted escapes.
Sliding insect screens for windows and doors, specially designed for homes with pets. They feature a scratch-resistant mesh that enhances durability and helps prevent damage caused by cats or other animals. A practical solution that allows you to enjoy ventilation and protection without compromising peace of mind at home.
Our sliding insect screens for windows and doors are a practical solution to keep spaces ventilated while enhancing everyday protection. This model is specially designed for homes with pets, featuring a highly durable fabric: a scratch-resistant mesh that helps prevent tears and extends the product’s lifespan. Its sliding system allows for easy integration into windows and sliding doors, ensuring comfortable and functional use. Thanks to their durability and discreet design, these insect screens adapt easily to any space, combining durability, comfort, and effective protection without compromising ventilation.
Yes, if the coin fits, the product can be installed, as long as it meets the following requirements:
1. The window must be sliding.
2. The material must be aluminum.
3. The outer frame profile is no more than 4 mm thick.
4. No protruding handles or knobs.
5. Finally, the top and bottom profiles must be at least 3 cm wide so that the mosquito net can be fixed and slid correctly.

No, this product is only suitable for aluminum sliding windows.
No, because the mosquito net will cover the part of the window that is open, and the two window strips will be at the other end, preventing insects from entering.
No. It is only compatible with aluminum sliding windows (provided they meet the requirements in the measurement guide).
Yes. This mosquito screen features a specially reinforced mesh, specifically designed to withstand the typical scratches of pets such as cats and dogs. It is much more durable than a standard mosquito screen.
The mesh is designed to withstand daily use by pets, including light pushing or leaning. However, like any fabric, it is not indestructible against excessive force or strong impacts.
The main difference is the material: this mesh is thicker and more resistant, which prevents easy tearing from scratches. It maintains the functionality of a traditional mosquito screen, but with greater durability in homes with pets.
No. It is designed to maintain its shape and tension over time, even with regular use by pets.
Yes. It acts as a protective barrier, allowing the room to be ventilated without fully opening the window, preventing unwanted escapes.
Before starting to measure, it is very important to take into account:
1. That the window is sliding.
2. The material must be aluminum.
3. That there are no protruding handles or knobs.
4. That the space between the window leaf and the frame is sufficient to allow the mosquito net to slide over the window. The quick way to do this is to put a 5 cent coin, if the coin fits in the hole, so does the mosquito net.
5. The outside profile of the “L” frame does not exceed 4 mm.
6. Finally, if our door or window is installed up to the floor or ceiling, all the top, bottom and side profiles must be at least 3 cm wide, so that the mosquito net can be fixed and slide correctly.
Width:
The width of the mosquito net must be equal to the width of one of the sashes of the sliding windows.
Height :
To measure the height, it is recommended to carry out measurements at various points of the window frame profile. At the top of the frame, the reference point is the bottom of the frame. At the bottom of the frame, the reference point is the top of the frame.
Warning!
If the height measurement is different between the left side and the right side, use the smaller measurement as the reference.
If the difference between one height and the other is greater than 4 mm, the sliding screen cannot be manufactured.
This screen is designed only to be placed on a sliding window, so to ensure it stays in place, the screen will have dimensions larger than the measurements requested in the order when including the frames.