Especifica las medidas en centímetros.
El debe estar entre: (cm) y (cm)
Estimated shipping on 20.02.23
You have the possibility to choose to buy only the fabric to renew your Japanese panels, or buy them completely including the rail, you choose.
Here you will find the measurements of the headrail, slats and bottom rail.
The Perfect Fit venetian blinds include:
· Supports
· Trims
· Venetian
· Side guides
· Card to position the product
· Rod
No, for this product you don't need to drill or drill holes, nor tools, since its supports are installed on the window bead, being perfectly fixed.
Perfect Fit 25 mm aluminium venetian blinds are the perfect product for non-drilling. They are designed to be fitted to tilt and turn windows and doors without the need for drilling or the use of any tools.
Perfect fit venetian blinds consist of a frame and an aluminium venetian blind which, by means of its brackets, is installed on the window profile and remains fixed and secure. This type of product protects you in an efficient way, as its aluminium slats are highly resistant. Its manual operation is very easy to use, you will be able to raise and lower the venetian blind in an easy way and adjust the light entrance of its slats through its rod. If what you are looking for is a product where you do not have to make holes, easy to install and that protects you, the Perfect Fit blind is just what you need. All the accessories such as the head, the threads or the ribbon and the lower finish will be the same color that we choose our slat. With different mechanisms and drives to adjust and drive the blind, you will be able to select the one that best suits you. A customized and unique product for you.
Here you will find the measurements of the headrail, slats and bottom rail.
The Perfect Fit venetian blinds include:
· Supports
· Trims
· Venetian
· Side guides
· Card to position the product
· Rod
No, for this product you don't need to drill or drill holes, nor tools, since its supports are installed on the window bead, being perfectly fixed.
Look at the window from inside your room, in this way you must select the position of the activation, if it is on the left or on the right. Where the cord and rod, the chain, or where the connection to your home's electrical system will go.
It is very important to bear in mind that the depth of the bead must be at least 1,8 cm. If it is less than 1,8 cm, we will not have enough depth to install the Perfect Fit venetian blind.
1. Straight bead.
2. Beveled bead.
3. rounded bead.
Here we indicate the measures that cover each of the supports that we have available.
· Supports of 18 are for beads with a depth of 1,8 cm.
· Supports of 22 are for beads with depth between 2,1 and 2,2 cm.
· Supports of 32 are for beads with depth between 2,7 and 3 cm.
Important: This product can only be installed on tilt-and-turn, casement or fixed windows or doors. This type of product is not compatible with sliding windows.
Make sure there is enough space around the outside frame of the window. Minimum 2,5 mm. Otherwise, the Perfect Fit Venetian blind cannot be installed.
Measure the glass area of each window or door. You should measure from the inside edges of the frame. Do not include any beading or rubber gaskets in your measurements. We recommend measuring at three different points and using the smallest measurement taken.