Estimated shipping on 21.02.25
In this table you will find the measurements of the vertical laminate on both sides.
*All measurements are in centimeters.
In this table you will find the dimensions of the vertical slats on one side.
*All measurements are in centimeters.
Yes, but it will have to be done with a budget, with our commercial department and the number of blades will always be even.
As they are technical fabrics, vertical slat blinds are very easy to clean, as they can only be cleaned with a damp cloth and a few drops of neutral soap.
It is not recommended, under any circumstances, to immerse or wash the slats in water, as the fabric will lose its sizing and, therefore, its shape. Do not rub the stain hard either, as this can damage the fabric and even cause it to lose colour in the area.
This type of fabric, under normal conditions, repels dust, so a quarterly cleaning and a little more thorough wiping with a cloth in case they have any splash stains, will be more than enough.
In this video we will show you how to align the gears to correct the defect and make it work correctly.
The grey boxes indicate the centimeter length of the rail, while the white boxes indicate the approximate number of slats for that size.
1. Ceiling Installation
When the slats are installed on the ceiling, we recommend fixing the brackets at a distance of 12 cm from the wall, in order to have a minimum space of 5 cm between the slats and the wall.
2. Wall installation
When the blades are installed on the wall, the distance (D) between the blades and the wall depends on the blade width (L) and the size of the fixing square (E):
The grey boxes indicate the centimetre length of the rail, while the white boxes indicate the approximate number of slats for that size.
Both are great, but there are particularities of each that can influence the customer's choice:
With a rod, when you pull the curtain down, you must pull the rod, so that the force to move the blades is done by the person.
While witha cord, the blades mechanically move sideways, simply by pulling the cord.
The Opaco Corti vertical slats are a product that offers you to adjust the entrance of light from more to less darkness, since its mechanisms allow you to orient the slats to decide the amount of light you need in the room.
technical and innovative fabric with a synthetic finish, which will make it easier for you to maintain. Available in neutral tones and countless combinations. Thanks to its adaptability to large windows and high ceilings, this product provides amplitude and continuity to the places where they are installed. At Cortinadecor we send your slats tailored to the chosen color and ready to place on your rail, along with the supports, chains, pegs and screws for easy installation.
In this table you will find the measurements of the vertical laminate on both sides.
*All measurements are in centimeters.
In this table you will find the dimensions of the vertical slats on one side.
*All measurements are in centimeters.
Yes, but it will have to be done with a budget, with our commercial department and the number of blades will always be even.
As they are technical fabrics, vertical slat blinds are very easy to clean, as they can only be cleaned with a damp cloth and a few drops of neutral soap.
It is not recommended, under any circumstances, to immerse or wash the slats in water, as the fabric will lose its sizing and, therefore, its shape. Do not rub the stain hard either, as this can damage the fabric and even cause it to lose colour in the area.
This type of fabric, under normal conditions, repels dust, so a quarterly cleaning and a little more thorough wiping with a cloth in case they have any splash stains, will be more than enough.
In this video we will show you how to align the gears to correct the defect and make it work correctly.
The grey boxes indicate the centimeter length of the rail, while the white boxes indicate the approximate number of slats for that size.
1. Ceiling Installation
When the slats are installed on the ceiling, we recommend fixing the brackets at a distance of 12 cm from the wall, in order to have a minimum space of 5 cm between the slats and the wall.
2. Wall installation
When the blades are installed on the wall, the distance (D) between the blades and the wall depends on the blade width (L) and the size of the fixing square (E):
The grey boxes indicate the centimetre length of the rail, while the white boxes indicate the approximate number of slats for that size.
Both are great, but there are particularities of each that can influence the customer's choice:
With a rod, when you pull the curtain down, you must pull the rod, so that the force to move the blades is done by the person.
While witha cord, the blades mechanically move sideways, simply by pulling the cord.