Especifica las medidas en centímetros.
El debe estar entre: (cm) y (cm)
Estimated shipping on 20.02.23
You have the possibility to choose to buy only the fabric to renew your Japanese panels, or buy them completely including the rail, you choose.
The lacquering of the handle will be:
If we have chosen white aluminium colour, the crank handle will be white colour.
If we have chosen the aluminium colour silver tx, the crank handle will be silver tx.
If we have chosen aluminium colour brown 8014, the crank handle will be brown 8014.
Except for black lacquered shades, grey 7012 and grey 7016 tx, which will be the handle in black colour.
This bracket can be used for wall or ceiling installation.
Approximately 11 cm less. 5.5 cm on each side.
The diameter is 60 mm if manually driven and 70 mm if motor driven.
For a better solution to this question, we prefer that you attach a photo to our photodecor service.
Yes, but Cortinadecor does not offer this service.
Yes, it could be installed, since the brackets also have that option.
The straight point awning is perfect to be installed on balconies or windows. They have been designed to protect and insulate windows from the sun and temperatures.
One of the characteristics of the straight point awning is its highly resistant injected aluminum arms, which exert constant tension on the canvas, thus allowing it to withstand the wind without deforming the awning. These arms provide a range of inclination angles of up to 170º, thus offering us totally vertical coverage and protecting us from the sun's rays throughout the day. It is manufactured with a double drop canvas, that is, the arm describes a semi-circumference that goes from the vertical position upwards (canopy folded) to the vertical position downwards (canvas extended) for greater protection. The system is specially designed so that the tension is reduced as the awning is rolled up so as not to subject the canvas or the supports to unnecessary tension when the awning is folded. This awning is manufactured in more than 20 different fabric colors and you can choose from 6 aluminum colours. Protect, isolate and enjoy views with the straight point awning.
The lacquering of the handle will be:
If we have chosen white aluminium colour, the crank handle will be white colour.
If we have chosen the aluminium colour silver tx, the crank handle will be silver tx.
If we have chosen aluminium colour brown 8014, the crank handle will be brown 8014.
Except for black lacquered shades, grey 7012 and grey 7016 tx, which will be the handle in black colour.
This bracket can be used for wall or ceiling installation.
Approximately 11 cm less. 5.5 cm on each side.
The diameter is 60 mm if manually driven and 70 mm if motor driven.
For a better solution to this question, we prefer that you attach a photo to our photodecor service.
Yes, but Cortinadecor does not offer this service.
Yes, it could be installed, since the brackets also have that option.
You can select two different types of lacquer for the supports and profiles of the blind awning.
1. Textured lacquer:
This is one of the main innovations in the field of lacquering Qualicoat-certified profiles. With rough texture and matte finish.
2. Classic lacquer:
It has a smooth texture and a semi-matte finish.
Important:
The handles are only available in White, Grey, Textured black lacquer and Ral 8014.
The drive machines are only available in White, Silver, Black and Ral 8014.
Plastic cap-type parts are only available in black or white.
We have to bear in mind that in order to open and close the awning we have to be able to comfortably reach the crank. For this reason, at Cortinadecor we offer different types of measures.
Its measurements and its special steel tip allow it to be easily inserted into the winding machine, even when it is at a great height.
The arm outlet measurements are fixed (0.80 cm, 0.90 cm, 100 cm, 120 cm, 130 cm, 140 cm, 150 cm). These arms, once fixed to the wall, are mobile, so they can be fixed in different positions (in a range of 0º to 170º) and make the awning a very versatile model, generating shaded areas.
For knowing which arm size to choose, it is best to measure the shadow area that we want to cover. Half will be the arm measurement that we will choose. As they are fixed measures, you must select the one that best suits your needs. For example: If we want to cover a total shadow of 240 cm high, we will select an arm of 120 cm.