Especifica las medidas en centímetros.
El debe estar entre: (cm) y (cm)
Estimated shipping on 17.02.23
You have the possibility to choose to buy only the fabric to renew your Japanese panels, or buy them completely including the rail, you choose.
Our products are made with synthetic fabrics that repel dust, especially screen and opaque fabrics. Here are some maintenance tips:
1. We don't need to put them in the washing machine to clean them.
2. If you have a stain, a towel or a simple damp cloth and soap will be enough to clean it.
3. To remove the dust, we can use a vacuum cleaner or pressurized air, without rubbing.
4. We must not use solvents or abrasive substances that could damage the coating of the fabric, such as ammonia or bleach.
5. Careful with photographic blinds, as they are more delicate.
One of the most important points of a roller blind is the diameter of the tube. At Cortinadecor we use a 43 mm aluminum tube, which is longer than a standard blind. It is also reinforced on the inside by aluminum nerves that guarantee the stability of the blind. This will prevent it from bending or creasing.
The screen fabric is the only one that offers visibility to the outside. It's perfect if you want to regulate the light inside and still enjoy the views to the outside.
The translucent fabric provides more privacy than the screen, as it allows light to pass through without visibility both during the day and at night. It can be a good option if our windows are very large or if we are very exposed to the street.
Opaque technical fabrics are designed to not allow light to pass through. In this way, we get privacy and darkness, which makes them the best choice if we don't have blinds in the bedroom or in a screening room. The fabric does not let light through, but light can enter from the sides as the blind is not fully adjusted like a roller blind.
Yes, but in this case, plugs and screws suitable for plasterboard must be used. These plugs and screws can be purchased at any hardware store.
It is important to note that the width of the blind corresponds to the measurement from the outside of one support to the outside measurement of the other support, and there will always be 5 cm less fabric. For example, if we order a 100 cm blind, the fabric size will be 95 cm.
Our Cortinadecor roller blind when rolled up, they can occupy a vertical space of 7.5 cm. It is important to take this measure into account so that the blind does not hit the window when trying to open it. In a running window, we won't have this problem.
When it comes to separating our blind from the window, it all depends on the type of support and whether it is fixed to the ceiling or the wall.
1. If we choosethe short wall bracket andstuck drop, it will have a spacing of about 2 cm.
2. If we choosewall bracket short and cascading drop, it will have a spacing of about 7 cm.
3. If we choose the long wall bracket and hanging down, it will have a spacing of about 3.3 cm.
4. If we choose the long wall bracket and cascade drop, it will have a spacing of about 11 cm.
If the blind is installed on the ceiling, it can be spaced as needed so that it does not hit any obstacles when it is lowered.
The recommended option when we have an obstacle is to install it on the ceiling, but if we don't have this possibility, see the types of installation below.
1. Ceiling installation: The blind must have enough space so that it does not touch the handle.
2. Wall mounting: Two brackets are available, one short and one long. The option that most separates the blind from the window will be thelong support and a cascade drop, the fabric will be separated by 11 cm. If the handle protrudes more than this distance, we recommend placing the blind on the ceiling and giving it enough space so that when you lower the blind it does not hit the handle.
Roller blinds are made from synthetic fabrics that repel dust, especially screen and opaque fabrics. That's why we don't need to put them in the washing machine to clean them. Firstly, lower the blind until it is fully unfolded, there is no need to remove it from its supports. If it has a stain, a towel or a simple damp cloth and soap will be enough to clean it. Likewise, dust can also be removed using a vacuum or pressurized air, without scrubbing. Of course, we must not use solvents or abrasive substances that could damage the fabric coating, such as ammonia or bleach. Care should be taken with photographic blinds, as they are more delicate.
Your order will include:
- Made-to-measure product in the chosen color.
- Supports, screws and mechanisms.
And it's ready for easy installation.
Our products are made with synthetic fabrics that repel dust, especially screen and opaque fabrics. Here are some maintenance tips:
1. We don't need to put them in the washing machine to clean them.
2. If you have a stain, a towel or a simple damp cloth and soap will be enough to clean it.
3. To remove the dust, we can use a vacuum cleaner or pressurized air, without rubbing.
4. We must not use solvents or abrasive substances that could damage the coating of the fabric, such as ammonia or bleach.
5. Careful with photographic blinds, as they are more delicate.
One of the most important points of a roller blind is the diameter of the tube. At Cortinadecor we use a 43 mm aluminum tube, which is longer than a standard blind. It is also reinforced on the inside by aluminum nerves that guarantee the stability of the blind. This will prevent it from bending or creasing.
The screen fabric is the only one that offers visibility to the outside. It's perfect if you want to regulate the light inside and still enjoy the views to the outside.
The translucent fabric provides more privacy than the screen, as it allows light to pass through without visibility both during the day and at night. It can be a good option if our windows are very large or if we are very exposed to the street.
Opaque technical fabrics are designed to not allow light to pass through. In this way, we get privacy and darkness, which makes them the best choice if we don't have blinds in the bedroom or in a screening room. The fabric does not let light through, but light can enter from the sides as the blind is not fully adjusted like a roller blind.
Yes, but in this case, plugs and screws suitable for plasterboard must be used. These plugs and screws can be purchased at any hardware store.
It is important to note that the width of the blind corresponds to the measurement from the outside of one support to the outside measurement of the other support, and there will always be 5 cm less fabric. For example, if we order a 100 cm blind, the fabric size will be 95 cm.
Our Cortinadecor roller blind when rolled up, they can occupy a vertical space of 7.5 cm. It is important to take this measure into account so that the blind does not hit the window when trying to open it. In a running window, we won't have this problem.
When it comes to separating our blind from the window, it all depends on the type of support and whether it is fixed to the ceiling or the wall.
1. If we choosethe short wall bracket andstuck drop, it will have a spacing of about 2 cm.
2. If we choosewall bracket short and cascading drop, it will have a spacing of about 7 cm.
3. If we choose the long wall bracket and hanging down, it will have a spacing of about 3.3 cm.
4. If we choose the long wall bracket and cascade drop, it will have a spacing of about 11 cm.
If the blind is installed on the ceiling, it can be spaced as needed so that it does not hit any obstacles when it is lowered.
The recommended option when we have an obstacle is to install it on the ceiling, but if we don't have this possibility, see the types of installation below.
1. Ceiling installation: The blind must have enough space so that it does not touch the handle.
2. Wall mounting: Two brackets are available, one short and one long. The option that most separates the blind from the window will be thelong support and a cascade drop, the fabric will be separated by 11 cm. If the handle protrudes more than this distance, we recommend placing the blind on the ceiling and giving it enough space so that when you lower the blind it does not hit the handle.
Roller blinds are made from synthetic fabrics that repel dust, especially screen and opaque fabrics. That's why we don't need to put them in the washing machine to clean them. Firstly, lower the blind until it is fully unfolded, there is no need to remove it from its supports. If it has a stain, a towel or a simple damp cloth and soap will be enough to clean it. Likewise, dust can also be removed using a vacuum or pressurized air, without scrubbing. Of course, we must not use solvents or abrasive substances that could damage the fabric coating, such as ammonia or bleach. Care should be taken with photographic blinds, as they are more delicate.
Your order will include:
- Made-to-measure product in the chosen color.
- Supports, screws and mechanisms.
And it's ready for easy installation.
When you select a color for the supports of your blind, you must take into account that the activation chain will be different. in the same color as the chosen support except in the Metallic color where the chain is delivered in grey.
1. Reverse
Looking at the front window from the inside, the fabric falls behind the tube of the roller blind, leaving it visible. In this case, the fabric sticks to the glass of our window.
2. Standard
Looking at the front window from the inside, the fabric falls behind the tube of the roller blind, leaving it visible. In this case, the fabric sticks to the glass of our window.
Look at the window from inside your room: in this way you must select the position of the mechanism, if it is to the left or to the right.
The width that we will indicate corresponds to the total width of the blind, counting the supports. Instead, the fabric will be 5 cm less than that measurement (-2.5 cm on each side).
The height that we will indicate corresponds to the total height of the blind when it is closed. Fully lowered and will depend on of the type of installation for which we have opted. To choose the type of installation, we must take into account the possible obstacles that may prevent the lowering of our blind (blind drawers, handles, radiators...). In that case, it is always better to opt for a ceiling installation. To be able to distance the blind from the window according to the space we need.