Especifica las medidas en centímetros.
El debe estar entre: (cm) y (cm)
Estimated shipping on 13.02.23
You have the possibility to choose to buy only the fabric to renew your Japanese panels, or buy them completely including the rail, you choose.
1. Bracket for wall or ceiling installation.
2. Extendable long brackets for wall installation
3. Extra Long extendable brackets for wall installation
The top and bottom edge of the venetian blinds are the same for 16 mm slats and for 25 mm slats and non-deformable PVC slats.
The frame is the profile that attaches the glass to the window frame. There are three types of frames, the most common being the square one, but there are also round and beveled jonquils.
The back of the frame must be at least 1.5 cm long and be square, otherwise we will not be able to install our venetian blinds system. The bracket to choose should be the wall/ceiling bracket and must be fixed with special threaded aluminum sheet screws available at any hardware store.
Square frame
Here are some maintenance tips:
1. To remove dust, we can use a feather duster or a dust cloth.
2. We must not use solvents or abrasive substances that could damage the coating of the material, such as ammonia or bleach.
3. Careful with wooden Venetian blinds, as they are more delicate.
The measurements shown below are approximate:
Resistant aluminium venetian blinds with slender 16 mm slats made to measure with the best components.
The slats of this type of venetian blind guarantee greater resistance due to their aluminium material, the total closure of the slats prevents and blocks light from entering the interior. With a wide color palette, you can decorate any room with them. All the accessories such as the head, the threads or the ribbon and the lower finish will be the same color that we choose our slat. With different mechanisms and drives to adjust and drive the blind, you will be able to select the one that best suits you. A customized and unique product for you.
1. Bracket for wall or ceiling installation.
2. Extendable long brackets for wall installation
3. Extra Long extendable brackets for wall installation
The top and bottom edge of the venetian blinds are the same for 16 mm slats and for 25 mm slats and non-deformable PVC slats.
The frame is the profile that attaches the glass to the window frame. There are three types of frames, the most common being the square one, but there are also round and beveled jonquils.
The back of the frame must be at least 1.5 cm long and be square, otherwise we will not be able to install our venetian blinds system. The bracket to choose should be the wall/ceiling bracket and must be fixed with special threaded aluminum sheet screws available at any hardware store.
Square frame
Here are some maintenance tips:
1. To remove dust, we can use a feather duster or a dust cloth.
2. We must not use solvents or abrasive substances that could damage the coating of the material, such as ammonia or bleach.
3. Careful with wooden Venetian blinds, as they are more delicate.
The measurements shown below are approximate:
If you want more than one smart blind you need to know that with a single remote you can control up to 4 blinds. (with 4 channel remote control).
That is to say, it is not necessary to buy a remote control for each blind.
Look at the window from inside your room, in this way you must select the position of the activation, if it is on the left or on the right. Where the cord and rod, the chain, or where the connection to your home's electrical system will go.
1. String:
This system is also called single-control operation because the same chain allows the blind to be raised and lowered and also to rotate the slats to regulate the entry of light.
2. Cord and rod:
The Venetian has two types of drive. We can regulate the entry of light by turning the slats with the rod. And to lower and raise the blind, we will use the cord.
3. Motorized:
This system allows the venetian blind to be operated remotely, with the help of a control, both for raising and lowering and for turning the slats to regulate the entry of light.
*This option is only available under commercial budget and some colors.
This option is the most aesthetic when we have a large window or door. In addition, by installing it on the ceiling, it also allows us to hide the blind box, which is very often visually annoying.
Note: If we want to install our Venetian blind on the frame or on the beading of our window, this is the option we must choose.
If we have a very high ceiling, we can also install our Venetian blind to the wall, we must first verify that we do not have any obstacle that prevents its lowering (shutter box, crank, handles, radiators...)
For those cases we have several wall installation options that indicate the length of the bracket that will be included in the order. They allow the venetian blind to be distanced from the window.
The width of the blind will depend on the type of installation we are going to choose and the type of window we are going to dress.
The height of the venetian blind will depend on the type of installation you choose.