Especifica las medidas en centímetros.
El debe estar entre: (cm) y (cm)
Estimated shipping on 15.02.23
You have the possibility to choose to buy only the fabric to renew your Japanese panels, or buy them completely including the rail, you choose.
Our products are made with synthetic fabrics that repel dust, especially screen and opaque fabrics. Here are some maintenance tips:
1. We don't need to put them in the washing machine to clean them.
2. If you have a stain, a towel or a simple damp cloth and soap will be enough to clean it.
3. To remove the dust, we can use a vacuum cleaner or pressurized air, without rubbing.
4. We must not use solvents or abrasive substances that could damage the coating of the fabric, such as ammonia or bleach.
5. Careful with photographic blinds, as they are more delicate.
One of the most important points of a roller blind is the diameter of the tube. At Cortinadecor we use a 43 mm aluminum tube, which is longer than a standard blind. It is also reinforced on the inside by aluminum nerves that guarantee the stability of the blind. This will prevent it from bending or creasing.
Yes, but in this case, plugs and screws suitable for plasterboard must be used. These plugs and screws can be purchased at any hardware store.
It is important to note that the width of the blind corresponds to the measurement from the outside of one support to the outside measurement of the other support, and there will always be 5 cm less fabric. For example, if we order a 100 cm blind, the fabric size will be 95 cm.
Our Cortinadecor roller blind when rolled up, they can occupy a vertical space of 7.5 cm. It is important to take this measure into account so that the blind does not hit the window when trying to open it. In a running window, we won't have this problem.
When it comes to separating our blind from the window, it all depends on the type of support and whether it is fixed to the ceiling or the wall.
1. If we choosethe short wall bracket andstuck drop, it will have a spacing of about 2 cm.
2. If we choosewall bracket short and cascading drop, it will have a spacing of about 7 cm.
3. If we choose the long wall bracket and hanging down, it will have a spacing of about 3.3 cm.
4. If we choose the long wall bracket and cascade drop, it will have a spacing of about 11 cm.
If the blind is installed on the ceiling, it can be spaced as needed so that it does not hit any obstacles when it is lowered.
The recommended option when we have an obstacle is to install it on the ceiling, but if we don't have this possibility, see the types of installation below.
1. Ceiling installation: The blind must have enough space so that it does not touch the handle.
2. Wall mounting: Two brackets are available, one short and one long. The option that most separates the blind from the window will be thelong support and a cascade drop, the fabric will be separated by 11 cm. If the handle protrudes more than this distance, we recommend placing the blind on the ceiling and giving it enough space so that when you lower the blind it does not hit the handle.
Roller blinds are made from synthetic fabrics that repel dust, especially screen and opaque fabrics. That's why we don't need to put them in the washing machine to clean them. Firstly, lower the blind until it is fully unfolded, there is no need to remove it from its supports. If it has a stain, a towel or a simple damp cloth and soap will be enough to clean it. Likewise, dust can also be removed using a vacuum or pressurized air, without scrubbing. Of course, we must not use solvents or abrasive substances that could damage the fabric coating, such as ammonia or bleach. Care should be taken with photographic blinds, as they are more delicate.
The translucent fabric is a lighter fabric and its main feature is that it provides more privacy than the screen, as it allows light to pass through without visibility both during the day and at night. It can be a good option if our windows are very large or if we are very exposed to the street.
We also have our technical fabrics, such as the screen, which have several light entrances, or opaque fabrics whose function is to block the passage of light.
The opaque fabrics are made to not allow light to pass through. In this way, we get privacy and darkness, which makes them the best choice if we don't have blinds in the bedroom or in a screening room. The fabric does not let light through, but it can enter from the sides as the blind, panel or vertical slat is not fully adjusted as a blind can be.
The screen fabric allows you to regulate the amount of light that passes through the fabric and allows you to preserve the view depending on the degree of aperture.
There are several degrees of aperture:
· 1% opening
Minimum transparency and low visibility to the outside.
· 3% opening
Transparency medium and low visibility to the outside.
· Opening 5%
Medium transparency and good visibility to the outside.
Your order will include:
- Made-to-measure product in the chosen color.
- Supports, screws and mechanisms.
And it's ready for easy installation.
Cortinadecor's children's blinds for children are perfect for decorating their room in a personalised way. They are manufactured in three different types of fabrics that vary in their composition. We have two that let the sunlight through, screen and translucent, and another one that does not let the light through, opaque.
Personalise them with their name, their date of birth or with their favourite phrase, they will be amazed when they see it hanging in their room. At Cortinadecor we use a 43 mm reinforced roller tube, high quality brackets, screw covers in the same colour as the chain, fluid operation that facilitates the raising and lowering of the blind and child safety, to avoid possible accidents with the chains. You can choose between manual or motorised operation for greater comfort. Easy to clean and with the guarantee of a top quality product.
Our products are made with synthetic fabrics that repel dust, especially screen and opaque fabrics. Here are some maintenance tips:
1. We don't need to put them in the washing machine to clean them.
2. If you have a stain, a towel or a simple damp cloth and soap will be enough to clean it.
3. To remove the dust, we can use a vacuum cleaner or pressurized air, without rubbing.
4. We must not use solvents or abrasive substances that could damage the coating of the fabric, such as ammonia or bleach.
5. Careful with photographic blinds, as they are more delicate.
One of the most important points of a roller blind is the diameter of the tube. At Cortinadecor we use a 43 mm aluminum tube, which is longer than a standard blind. It is also reinforced on the inside by aluminum nerves that guarantee the stability of the blind. This will prevent it from bending or creasing.
Yes, but in this case, plugs and screws suitable for plasterboard must be used. These plugs and screws can be purchased at any hardware store.
It is important to note that the width of the blind corresponds to the measurement from the outside of one support to the outside measurement of the other support, and there will always be 5 cm less fabric. For example, if we order a 100 cm blind, the fabric size will be 95 cm.
Our Cortinadecor roller blind when rolled up, they can occupy a vertical space of 7.5 cm. It is important to take this measure into account so that the blind does not hit the window when trying to open it. In a running window, we won't have this problem.
When it comes to separating our blind from the window, it all depends on the type of support and whether it is fixed to the ceiling or the wall.
1. If we choosethe short wall bracket andstuck drop, it will have a spacing of about 2 cm.
2. If we choosewall bracket short and cascading drop, it will have a spacing of about 7 cm.
3. If we choose the long wall bracket and hanging down, it will have a spacing of about 3.3 cm.
4. If we choose the long wall bracket and cascade drop, it will have a spacing of about 11 cm.
If the blind is installed on the ceiling, it can be spaced as needed so that it does not hit any obstacles when it is lowered.
The recommended option when we have an obstacle is to install it on the ceiling, but if we don't have this possibility, see the types of installation below.
1. Ceiling installation: The blind must have enough space so that it does not touch the handle.
2. Wall mounting: Two brackets are available, one short and one long. The option that most separates the blind from the window will be thelong support and a cascade drop, the fabric will be separated by 11 cm. If the handle protrudes more than this distance, we recommend placing the blind on the ceiling and giving it enough space so that when you lower the blind it does not hit the handle.
Roller blinds are made from synthetic fabrics that repel dust, especially screen and opaque fabrics. That's why we don't need to put them in the washing machine to clean them. Firstly, lower the blind until it is fully unfolded, there is no need to remove it from its supports. If it has a stain, a towel or a simple damp cloth and soap will be enough to clean it. Likewise, dust can also be removed using a vacuum or pressurized air, without scrubbing. Of course, we must not use solvents or abrasive substances that could damage the fabric coating, such as ammonia or bleach. Care should be taken with photographic blinds, as they are more delicate.
The translucent fabric is a lighter fabric and its main feature is that it provides more privacy than the screen, as it allows light to pass through without visibility both during the day and at night. It can be a good option if our windows are very large or if we are very exposed to the street.
We also have our technical fabrics, such as the screen, which have several light entrances, or opaque fabrics whose function is to block the passage of light.
The opaque fabrics are made to not allow light to pass through. In this way, we get privacy and darkness, which makes them the best choice if we don't have blinds in the bedroom or in a screening room. The fabric does not let light through, but it can enter from the sides as the blind, panel or vertical slat is not fully adjusted as a blind can be.
The screen fabric allows you to regulate the amount of light that passes through the fabric and allows you to preserve the view depending on the degree of aperture.
There are several degrees of aperture:
· 1% opening
Minimum transparency and low visibility to the outside.
· 3% opening
Transparency medium and low visibility to the outside.
· Opening 5%
Medium transparency and good visibility to the outside.
Your order will include:
- Made-to-measure product in the chosen color.
- Supports, screws and mechanisms.
And it's ready for easy installation.
When you select a color for the supports of your blind, you must take into account that the activation chain will be different. In the same color as the chosen support, except in the Metallic color, where the chain is delivered in gray.
1. Reverse
Looking at the front window from the inside, the fabric falls behind the tube of the roller blind, leaving it visible. In this case, the fabric sticks to the glass of our window.
2. Standard
Looking at the front window from the inside, the fabric falls behind the tube of the roller blind, leaving it visible. In this case, the fabric sticks to the glass of our window.
Our roller blinds offer several types of drive. They can be activated manually with a chain, remotely with a remote control, from the wall with a button or even with virtual assistants such as Alexa or Google Assistant. In these last three cases, the blind would be motorized. Any of the motorized options is ideal for child safety as they do not include chains.
Look at the window from inside your room: in this way you must select the position of the mechanism, if it is to the left or to the right.
This option is the most aesthetic when we have a large window or door. In addition, by installing it on the ceiling, it also allows us to hide the shutter box, which very often is visually annoying.
If we have If we have a very high ceiling, we can also install our blind to the wall, we must first verify that we do not have any obstacle that prevents the lowering of our blind (blind box, crank, handles, radiators…)
With the option “long wall” we will send you a longer support. This allows the blind to be separated so that it does not collide with any obstacle when descending, such as window handles, radiators, etc. However, if the obstacle is considerable, it is preferable to opt for a ceiling installation.
The screen is a technical fabric made of fiber glass and pvc or polyester and pvc. It is ideal for your home or office, but also for any public space, since it has a fire retardant treatment certified by the EU. Its micro-perforated allows you to see outside the while it protects you from the sun. In addition, there are various degrees opening so you can choose the fabric that best suits suit your needs.
The translucent roller blinds by Cortinadecor offer a wide range of colors. This material is optimal for use in humid environments thanks to its treatment anti bacterial. We can also note that it is a fabric that lets in light while giving you privacy, since they won't be able to see you from the outside. In short, it is a fabric very durable, easy to clean and maintain with a very affordable price.
When our opaque blinds are lowered, we provide total darkness, since it is a fabric 100% Black Out, even in broad daylight. They are very recommended in rooms where we need darkness total or if we have windows without blinds. In addition to protect you from the heat, they are also ideal for living rooms projection, hotels, hospitals and schools, since they have with the class 1 flame retardant certificate.
The width that we will indicate corresponds to the total width of the blind, counting the supports. Instead, the fabric will be 5 cm less than that measurement (-2.5 cm on each side).
The height that we will indicate corresponds to the total height of the blind when it is closed. Fully lowered and will depend on of the type of installation for which we have opted. To choose the type of installation, we must take into account the possible obstacles that may prevent the lowering of our blind (blind drawers, handles, radiators...). In that case, it is always better to opt for a ceiling installation. To be able to distance the blind from the window according to the space we need.